Blogger news

Friday, 13 December 2013

Install latest 4.xx CFW PS3

Follow me on twitter @5aksh

Useful Tools:
Latest multiMAN (4.50.01)
eEID Root Key Dumper
Latest PPC+
Latest Showtime (4.2)
Latest mmTOOLS (4.50)
Latest reActPSN (v2.27)
  Here are my guides for installing the latest 4.xx CFWs on your PS3: If you're on OFW higher than 3.55, you CAN'T install CFW directly! You need to check if your model is old enough to be hackable (older than June 2011). If you're lucky enough and it is hackable, you can use a hardware flasher (NOR Guide | NAND Guide) to dump your 3.56+ flash, patch it and re-flash it before you can install CFW using the guides below. If you're already on CFW, you can always start with the 2 (optional) steps below before installing the CFW of your choice:
  • Dump your NOR/NAND Flash: Install latest version of multiMAN CEX, plug in a FAT32 formatted USB flash drive into the right USB port, launch multiMAN under the Game column and go to mmOS > Press on any file > Open in HEX viewer > Press SELECT > Press START > Export GameOS LV2: Select No > Export HV LV1: Select No > Export FLASH: Select Yes This creates a backup of your NOR/NAND flash so that you can recover using a hardware flasher in case of a (highly unlikely) brick. It is recommended to do it every time you upgrade/downgrade your CFW just in case something goes wrong.
  • Dump your eEID Root Key: This has to be done only once, while (and if) still on 3.55 CFW, just in case you want to ever switch to DEX in the future without having to downgrade back to 3.55 CFW to dump it. Install eEID_RKDumper.pkg > Unplug all USB devices > Launch eEID RKDumper under the Game column. It will black screen for 10-15 seconds, beep 3 times and reboot automatically. Now FTP to your console and retrieve your Root Key/PCK1 from /dev_hdd0/tmp/eid_root_key (48 bytes). Once you retrieve your Root Key, you can delete eEID RKDumper from your XMB as it is not needed anymore.
Rebug 4.46.1 LITE: This CFW can only be installed on top of CEX. If you're on DEX, you have to convert to CEX before you can install this CFW. If you don't know what DEX is, you're most likely on CEX. If you're on 3.55 or lower OFW, or a hardware flasher patched 3.56+ OFW, or any 4.46 or lower CFW, you can install Rebug 4.46.1 LITE from XMB by following the guide below:
1- Install Rebug 4.46.1 LITE from XMB: Download Rebug 4.46.1 LITE from Rebug's website, verify the md5 hash with @DEFAULTDNB 's PPC+, rename the PUP to PS3UPDAT.PUP, put it on your FAT32 formatted flash drive in PS3\UPDATE, go to System Update and Update via Storage Media. Make sure there's NO original game disk in the drive, NO game is mounted and that you DON'T Update via Internet or else you would risk installing OFW >3.55! 2- Enable QA: Go to Package Manager > Install Package Files > PS3 Hard Disk and install Rebug Toolbox. Launch it under the Game column, go to Utilities and change Toggle QA Flag to Enabled. This is to ensure easier and safer downgrading. Notes:
  • OFW 4.50 has been released, make sure you don't accidentally update. You also need a spoofer to connect to PSN (with ban risk).
  • Make sure you use mM 4.46.00 or higher because older versions are not compatible with this CFW.
  • Make sure you install the Rebug Toolbox pkg included inside Package Manager because older versions are not compatible with this CFW.
  • Make sure you use reActPSN v2.27 or higher because older versions might not be fully compatible with this CFW.
Rebug 4.46.1 REX/D-REX: If you're on CEX you have to install the REX Edition. If you're on DEX, you have to install the D-REX Edition. If you're on 3.55 or lower OFW, or a hardware flasher patched 3.56+ OFW, or any 4.46 or lower CFW, you can install Rebug 4.46.1 REX/D-REX from XMB by following the guide below:
1- Install Rebug 4.46.1 REX/D-REX from XMB: Download Rebug 4.46.1 REX/D-REX from Rebug's website, verify the md5 hash with @DEFAULTDNB 's PPC+, rename the PUP to PS3UPDAT.PUP, put it on your FAT32 formatted flash drive in PS3\UPDATE, go to System Update and Update via Storage Media. Make sure there's NO original game disk in the drive, NO game is mounted and that you DON'T Update via Internet or else you would risk installing OFW >3.55! 2- Enable QA: Go to Package Manager > Install Package Files > PS3 Hard Disk and install Rebug Toolbox. Launch it under the Game column, go to Utilities and change Toggle QA Flag to Enabled. This is to ensure easier and safer downgrading. Notes:
  • OFW 4.50 has been released, make sure you don't accidentally update. You also need a spoofer to connect to PSN (with ban risk).
  • Make sure you use mM 4.46.02 or higher because older versions are not compatible with this CFW.
  • Make sure you install the Rebug Toolbox pkg included inside Package Manager because older versions are not compatible with this CFW.
  • Make sure you use reActPSN v2.27 or higher because older versions might not be fully compatible with this CFW.
Rogero 4.46 v1.01: This CFW can only be installed on top of CEX. If you're on DEX, you have to convert to CEX before you can install this CFW. If you don't know what DEX is, you're most likely on CEX. If you're on 3.55 or lower OFW, or a hardware flasher patched 3.56+ OFW, or any 4.46 or lower CFW, you can install Rogero 4.46 v1.01 from XMB by following the guide below:
1- Install Rogero 4.46 v1.01 from XMB: Download Rogero 4.46 v1.01 from tortuga-cove, verify the md5 hash with @DEFAULTDNB 's PPC+, rename the PUP to PS3UPDAT.PUP, put it on your FAT32 formatted flash drive in PS3\UPDATE, go to System Update and Update via Storage Media. Make sure there's NO original game disk in the drive, NO game is mounted and that you DON'T Update via Internet or else you would risk installing OFW >3.55! Notes:
  • OFW 4.50 has been released, make sure you don't accidentally update. You also need a spoofer to connect to PSN (with ban risk).
  • QA is enabled by default on this CFW.
  • Make sure you use mM 4.46.00 or higher because older versions are not compatible with this CFW.
  • Make sure you use reActPSN v2.27 or higher because older versions might not be fully compatible with this CFW.
HABIB 4.50 V1.01: [INSTALL AT YOUR OWN RISK] This CFW can only be installed on top of CEX. If you're on DEX, you have to convert to CEX before you can install this CFW. If you don't know what DEX is, you're most likely on CEX. If you're on 3.55 or lower OFW, or a hardware flasher patched 3.56+ OFW, or any 4.50 or lower CFW, you can install HABIB 4.50 V1.01 from XMB by following the guide below:
1- Install HABIB 4.50 V1.01 from XMB: Download HABIB 4.50 V1.01 from tortuga-cove, verify the md5 hash with @DEFAULTDNB 's PPC+, rename the PUP to PS3UPDAT.PUP, put it on your FAT32 formatted flash drive in PS3\UPDATE, go to System Update and Update via Storage Media. Make sure there's NO original game disk in the drive, NO game is mounted and that you DON'T Update via Internet or else you would risk installing OFW >3.55! Notes:
  • This CFW is built from OFW 4.50, so it prevents accidental updates to OFW >3.55 and allows PSN access (with ban risk) without the need for a spoofer.
  • QA is not enabled by default on this CFW. Enable QA before installation.
  • Make sure you use mM 4.50.00 or higher because older versions are not compatible with this CFW.

  • Make sure you use reActPSN v2.27 or higher because older versions might not be fully compatible with this CFW.

Written by

We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.

0 comments:

Post a Comment

© 2013 TechWorld. All rights resevered. Share on Blogger Template Free Download.